Home | About Us | Contact
 
   GAS REGULATORS
MODELS & OPTIONS
HIGH PRESSURE
MEDIUM PRESSURE
LOW PRESSURE
ACCESSORIES
    METERS
ROTARY METERS
TURBINE METERS
VORTEX SHEDDING METER
ULTRA SONIC METER
METER CORRECTORS
   SPECIALTY VALVES
FM CHECK VALVES
PRESSURE SLAM SHUTS
TEMPERATURE SLAM SHUT
PRESSURE RELIEF VALVES
   SALES CHAIN
CONTACT INFORMATION
DISTRIBUTOR LIST
DISTRIBUTOR LOGIN
Meters

 
Rotary Meter

Rotary Meter

Typical Application :
Commercial to low end Industrial

Suitable for : Suitable for natural gas and all non-corrosive gases. Field orientatble for flow direction. No upstream or downstream piping restrictions. Can be combined with EC-21 and EC-24 meter corrector electronics

Sizes :
2" and 3" Flows: Up to 17,600 SCFH at 15 PSIG

  Download Sales Brochure PDF
 
   
   
Turbine Meter

Turbine Meter

Typical Application : Large Commercial to Industrial

Suitable for : Suitable for natural gas and all non-corrosive gases, special versions for corrosive gases. Field orientable for flow direction, horizontal or vertical piping. Comes standard with low and high frequency outputs, built in battery powered electronic totalizer. Can be combined with EC-21 and EC-24 meter corrector electronics.

Sizes :
1" up to 24" Flows: From 900 to 1,800,000 SCFH at 15 PSIG

  Download Sales Brochure PDF
 
 
   
Vortex Shedding Meter

Vortex Shedding Meter

Typical Application : Industrial and Specialty Applications

Suitable for : Suitable for all gaseous and liquid medias typical to the gas, engineering and chemical industry. Large measuring range and highly accurate, excellent repeatability, installed in any position, maintenance possible without interruption of flow, dual output signal for additional devices such as data acquisition, processing devices, and flow computers.

Sizes :
1" up to 24" Flows: From 2,300 to 2,800,000 SCFH at 15 PSIG

  Download Sales Brochure PDF
  Download Technical Manual PDF
   
  Go to top
Ultra Sonics Meter

Ultra Sonics Meter

Typical Application : Large Industrial to Utility & Pipeline

Suitable for : High stability in case of flow disturbances through the use of up to 6 acoustical paths, replacement of sensors without the need for recalibration, high flow and essentially no pressure drop, robust sensor design using titanium is essentially dirt repellent. It measures flow in both directions, extremely accurate and repeatable.

Sizes :
4" up to 40" Flows: From 500 to 7,700,000 SCFH at 15 PSIG

  Download Sales Brochure PDF
 
   
   
Meter Correctors

Meter Correctors

Typical Application : Rotary and Turbine meters for instances when real time compressibility compensation is required

Suitable for : Both Temperature, and Pressure and Temperature correctors to account for variations in actual measured flows due to compressibility variants. The EC-21 Temperature Corrector and EC-24 Pressure and Temperature Corrector can be battery or 24 Vdc powered, options for explosion proof environments, and 4-20mA analog output of corrected flow rates available.

  Download Sales Brochure PDF
  Download Technical Manual PDF
   
  Go to top
   

  © 2009 Bryan Donkin USA, All rights reserved. Web designer – NetDogz